Reference
Mesh count and LPI
What mesh makers, ink makers and trade sources publish about mesh count and halftone LPI. Where they disagree, both are kept side by side.
Data read on 2026-11-01. Every row links to its source.
We quote makers' published data only and give no exposure, emulsion or chemistry advice; follow your film, ink and emulsion makers' own instructions.
Mesh to LPI, as published
| Mesh (threads/in) | Threads/cm | LPI | Smallest dot | Note | Source |
|---|---|---|---|---|---|
| 150LX | 59.1 (computed) | 45–55 | — | '45 and 55 line halftones can be imaged on 150LX and 180LX' (thin-thread mesh) | Murakami, Smart Mesh S + LXread 2026-11-01 |
| 160 | 63 (computed) | 32–40 | — | 32 lpi (/5), 40 lpi (/4) | ScreenPrinting.com blogread 2026-11-01 |
| 160 | 63 (computed) | 35 | 8% held consistently = high quality | 35 lpi 'about the lowest most shops use' | Blue Cotton blogread 2026-11-01 |
| 180LX | 70.9 (computed) | 45–55 | — | As above | Murakami, Smart Mesh S + LXread 2026-11-01 |
| 180–225 | 70.9–88.6 (computed) | 45 | — | 180-225 for 45 lpi; suggests 230 'for more margin' | ScreenPrinting.com help centreread 2026-11-01 |
| 200 | 78.7 (computed) | 50 | — | T-Biz Networkread 2026-11-01 | |
| 205–255 | 80.7–100.4 (computed) | 45 | — | 205 or 255 for 45 lpi ('process minimum') | Blue Cotton blogread 2026-11-01 |
| 230–265 | 90.6–104.3 (computed) | 65 | — | 65 lpi: 3.5x -> ~230 tpi; 4x -> 255-265 tpi (260) | Screen Printing magazine (April 2003)read 2026-11-01 |
| 230 | 90.6 (computed) | 46–57 | — | ScreenPrinting.com help centreread 2026-11-01 | |
| 240 | 94.5 (computed) | 55 | — | Worked example of R1; PDF https://www.murakamiscreen.com/documents/HalftoneAnglestopreventmoire.pdf. Also: white base on 250-300 mesh 'simply won't print well'. | Murakami Screenread 2026-11-01 |
| 305 | 120.1 (computed) | 55 | — | 5.5x, outside the blog's own 4-5x rule | Blue Cotton blogread 2026-11-01 |
| 355 | 139.8 (computed) | 85 | ExpoCheck test tints 10/25/50/75/85/90% | KIWO example: 85 lpi on 355 mesh uses the Fine resolution film. Coarse/medium/fine films = 35/55/85 lpi (13.8/21.7/33.4 l/cm); no mesh cut-offs given (tech info https://www.kiwo.com/s/ExpoCheckTech-Info.pdf) | KIWO ExpoCheckread 2026-11-01 |
| 356–457computed | 140–180 | 61–122 (computed)24 / 32 / 48 L/cm | 24 L/cm -> 5-95% printable; 32 L/cm -> ~10-90%; 48 L/cm -> ~20-80% | 140-165, sometimes 180 threads/cm for UV-ink process printing (graphics, not textiles); photos show Sefar PET 1500 150-31Y / 150-34Y. | Coates Screen Inksread 2026-11-01 |
| PET 1500 180/460-27Y PW 457computed | 180 | 76+ (computed)>30 L/cm | — | Snippet only; Sefar screen-print fineness range 6-48 lines/cm. | Sefarread 2026-11-01 · search snippet only; the page could not be read |
Ratio rules
| Rule | Mesh ÷ LPI | Note | Source |
|---|---|---|---|
| mesh_tpi = lpi x 4 to 4.5 | 4–4.5 | Works only with film output at specific angles ('Not all angles work'); requires four or more mesh openings per halftone dot. S-thread mesh can run 45/55 lpi below the 4x result. | Murakami Screenread 2026-11-01 |
| mesh_tpi = lpi x 3.5 or x 4 (the two most common, treated as minimums) | 3.5–4 | Author calls relying on rules of thumb 'pointless'; nominal counts rounded from metric, weft varies 5-7%, a 305 mesh may be ~290 tpi at tension; a 45° angle lowers effective frequency. | Screen Printing magazine, 'All Things Are Not as They Appear' (April 2003)read 2026-11-01 |
| lpi = mesh / 5 (or mesh / 4 for a 'dialed-in darkroom') | 4–5 | Recommends 22.5° angles; says printers typically choose 30% dot gain. | ScreenPrinting.com (Ryonet) blog, 'A Crash Course in Halftones'read 2026-11-01 |
| mesh = 4-5 x lpi | 4–5 | ScreenPrinting.com help centre (Ryonet)read 2026-11-01 | |
| mesh ≈ 4-5 x lpi | 4–5 | Its own 305 mesh / 55 lpi pairing (5.5x) falls outside its stated range. | Blue Cotton blogread 2026-11-01 |
| 'a mesh that is 4 to 5 times the LPI' | 4–5 | Avoid tints above 70%. | T-Biz Network (Scott Fresener), 'All About DPI, LPI, PPI & More' (2015-12-10)read 2026-11-01 |
| >= 3.5:1 required; >= 4.5:1 'international practice'; >= 5:1 for colour halftones | ≥ 3.5 | Kept as a disagreeing data point. | ZXC Print (Chinese supplier, low authority)read 2026-11-01 |
Smallest printable dot
| Rule | Note | Source |
|---|---|---|
| Smallest dot/line >= 2 mesh openings + 2 thread diameters, or >= 2 x total screen thickness (mesh + stencil); dots smaller than the opening fall through | KIWO-hosted article: Dave Dennings, 'Understanding Mesh Geometry', SGIA Journal, April 1998read 2026-11-01 | |
| Printable dot limit: 'Two thread counts and one mesh-opening' | Disagrees with D1 (2 openings + 2 threads). Both kept. | Coates Screen Inks (Harald de Groote), 'Process Printing with UV Inks'read 2026-11-01 |
| Smallest dot spans two threads + one mesh opening; medium thread diameter preferred | Search snippet only; page behind a bot checkpoint (not bypassed). | Sefar, 'Half-tone count' FAQread 2026-11-01 · search snippet only; the page could not be read |
| >= 4 mesh open areas per halftone dot | Murakami Screenread 2026-11-01 | |
| Holding an 8% dot consistently = high quality | Blue Cotton blogread 2026-11-01 |
Without a mesh count
- 40-65 lpi 'generally appropriate' for textiles; sweatshirts at least 10 lpi lower; 'Rule of 240': 240 / lpi ≈ viewing distance in feet — Screen Printing magazine (Mark Coudray), Oct 2002read 2026-11-01
Looked for, not found
Checked and left out, so you know they were not missed:
- Saati: No mesh-to-LPI rule found on saati.com
- Ulano: No mesh-to-LPI table found
- Sefar: sefar.com behind a Vercel bot checkpoint; not bypassed
- ImpressionsMag: impressionsmagazine.com returned 403
- Freehand AccuRIP mesh calculator: 403 to the reader
- Lawson: No mesh/LPI page found