Skip to content
Referință

Sită și LPI

Ce publică producătorii de sită, de cerneală și sursele de specialitate despre sită și LPI. Unde nu sunt de acord, le păstrăm pe amândouă.

Date citite pe 2026-11-01. Fiecare rând are sursa lui.

Cităm doar datele publicate de producători și nu dăm sfaturi de expunere, emulsie sau chimie; urmează instrucțiunile producătorilor de film, cerneală și emulsie.

Sită la LPI, cum e publicat

Sită (fire/inch)Fire/cmLPICel mai mic punctNotăSursă
150LX 59.1 (calculat)45–55—'45 and 55 line halftones can be imaged on 150LX and 180LX' (thin-thread mesh)Murakami, Smart Mesh S + LXcitit 2026-11-01
16063 (calculat)32–40—32 lpi (/5), 40 lpi (/4)ScreenPrinting.com blogcitit 2026-11-01
16063 (calculat)358% held consistently = high quality35 lpi 'about the lowest most shops use'Blue Cotton blogcitit 2026-11-01
180LX 70.9 (calculat)45–55—As aboveMurakami, Smart Mesh S + LXcitit 2026-11-01
180–22570.9–88.6 (calculat)45—180-225 for 45 lpi; suggests 230 'for more margin'ScreenPrinting.com help centrecitit 2026-11-01
20078.7 (calculat)50—T-Biz Networkcitit 2026-11-01
205–25580.7–100.4 (calculat)45—205 or 255 for 45 lpi ('process minimum')Blue Cotton blogcitit 2026-11-01
230–26590.6–104.3 (calculat)65—65 lpi: 3.5x -> ~230 tpi; 4x -> 255-265 tpi (260)Screen Printing magazine (April 2003)citit 2026-11-01
23090.6 (calculat)46–57—ScreenPrinting.com help centrecitit 2026-11-01
24094.5 (calculat)55—Worked example of R1; PDF https://www.murakamiscreen.com/documents/HalftoneAnglestopreventmoire.pdf. Also: white base on 250-300 mesh 'simply won't print well'.Murakami Screencitit 2026-11-01
305120.1 (calculat)55—5.5x, outside the blog's own 4-5x ruleBlue Cotton blogcitit 2026-11-01
355139.8 (calculat)85ExpoCheck test tints 10/25/50/75/85/90%KIWO example: 85 lpi on 355 mesh uses the Fine resolution film. Coarse/medium/fine films = 35/55/85 lpi (13.8/21.7/33.4 l/cm); no mesh cut-offs given (tech info https://www.kiwo.com/s/ExpoCheckTech-Info.pdf)KIWO ExpoCheckcitit 2026-11-01
356–457calculat140–18061–122 (calculat)24 / 32 / 48 L/cm24 L/cm -> 5-95% printable; 32 L/cm -> ~10-90%; 48 L/cm -> ~20-80%140-165, sometimes 180 threads/cm for UV-ink process printing (graphics, not textiles); photos show Sefar PET 1500 150-31Y / 150-34Y.Coates Screen Inkscitit 2026-11-01
PET 1500 180/460-27Y PW 457calculat18076+ (calculat)>30 L/cm—Snippet only; Sefar screen-print fineness range 6-48 lines/cm.Sefarcitit 2026-11-01 · doar fragment din căutare; pagina nu s-a putut citi

Reguli de raport

RegulăSită ÷ LPINotăSursă
mesh_tpi = lpi x 4 to 4.54–4.5Works only with film output at specific angles ('Not all angles work'); requires four or more mesh openings per halftone dot. S-thread mesh can run 45/55 lpi below the 4x result.Murakami Screencitit 2026-11-01
mesh_tpi = lpi x 3.5 or x 4 (the two most common, treated as minimums)3.5–4Author calls relying on rules of thumb 'pointless'; nominal counts rounded from metric, weft varies 5-7%, a 305 mesh may be ~290 tpi at tension; a 45° angle lowers effective frequency.Screen Printing magazine, 'All Things Are Not as They Appear' (April 2003)citit 2026-11-01
lpi = mesh / 5 (or mesh / 4 for a 'dialed-in darkroom')4–5Recommends 22.5° angles; says printers typically choose 30% dot gain.ScreenPrinting.com (Ryonet) blog, 'A Crash Course in Halftones'citit 2026-11-01
mesh = 4-5 x lpi4–5ScreenPrinting.com help centre (Ryonet)citit 2026-11-01
mesh ≈ 4-5 x lpi4–5Its own 305 mesh / 55 lpi pairing (5.5x) falls outside its stated range.Blue Cotton blogcitit 2026-11-01
'a mesh that is 4 to 5 times the LPI'4–5Avoid tints above 70%.T-Biz Network (Scott Fresener), 'All About DPI, LPI, PPI & More' (2015-12-10)citit 2026-11-01
>= 3.5:1 required; >= 4.5:1 'international practice'; >= 5:1 for colour halftones≥ 3.5Kept as a disagreeing data point.ZXC Print (Chinese supplier, low authority)citit 2026-11-01

Cel mai mic punct printabil

RegulăNotăSursă
Smallest dot/line >= 2 mesh openings + 2 thread diameters, or >= 2 x total screen thickness (mesh + stencil); dots smaller than the opening fall throughKIWO-hosted article: Dave Dennings, 'Understanding Mesh Geometry', SGIA Journal, April 1998citit 2026-11-01
Printable dot limit: 'Two thread counts and one mesh-opening'Disagrees with D1 (2 openings + 2 threads). Both kept.Coates Screen Inks (Harald de Groote), 'Process Printing with UV Inks'citit 2026-11-01
Smallest dot spans two threads + one mesh opening; medium thread diameter preferredSearch snippet only; page behind a bot checkpoint (not bypassed).Sefar, 'Half-tone count' FAQcitit 2026-11-01 · doar fragment din căutare; pagina nu s-a putut citi
>= 4 mesh open areas per halftone dotMurakami Screencitit 2026-11-01
Holding an 8% dot consistently = high qualityBlue Cotton blogcitit 2026-11-01

Fără număr de sită

Căutate, negăsite

Verificate și lăsate pe dinafară, ca să știi că nu le-am uitat:

  • Saati: No mesh-to-LPI rule found on saati.com
  • Ulano: No mesh-to-LPI table found
  • Sefar: sefar.com behind a Vercel bot checkpoint; not bypassed
  • ImpressionsMag: impressionsmagazine.com returned 403
  • Freehand AccuRIP mesh calculator: 403 to the reader
  • Lawson: No mesh/LPI page found