Skip to content
実験的

Epson L18050 / ET-18100 as an A3+ dye film printer

実験的Epson EcoTank L18050

Zorofilmに印刷プロファイルはありますが、ヘッドは最も近い機種からの流用か実験的とされているもの、または一般的なインクの入れ方がプロファイルのチャンネル構成と異なります。

要点

The L18050 is a current A3+ EcoTank with six dye inks. Epson India names it the L1800's replacement, and the ET-18100 shares its SKU base in Europe. InkOwl lists it as compatible with its 140 mL black dye bottle. Zorofilm prints to it as experimental: the head data is borrowed from the nearest known model, so check your first films closely.

One nozzle figure to doubt

Epson's EU page for the L18050 gives 180 nozzles for black and 180 per colour. The ET-18100 page says 900 per colour, which looks like a typo.

Neither Epson's EU nor its India page gives a maximum length for user-defined sizes, so we do not state one.

チャンネルと仕様

サイズ
A3+
チャンネル
6: K, C, LC, Y, M, LM
ノズル
180 black, 180 per colour (Epson EU L18050; the ET-18100 EU page says '900 per colour', apparently a typo)
インク
all dye
最大幅
329 mm — Zorofilmのプロファイルの印刷幅。当社のデータにEpsonの公表値はありません
最大長
— — Not on EU or India pages
ロール紙
なし
インク方式
tank (EcoTank bottles)
Epsonでの状況
EU: current (L18050 and ET-18100) · India: current (C11CK38503); Epson names it the L1800 replacement
フィルムRIPの対応リスト
AccuRIP: Windows not listed; Mac not listed · PrintFab: 掲載あり · Fiery FilmMaker v11: 掲載なし

ET-18100: EU (C11CK38401; L18050 is C11CK38402). Shared SKU base; inferred twin, not stated by Epson.

全色黒インク化の方法

販売店がこのプリンターに黒インクを入れる方法です。手順は各販売店のものです。販売店のページの手順に従ってください。当社は手順を転載・変更しません。

  1. すべてのタンクに黒の染料インク

    InkOwl lists L18050 as compatible with its 140 mL bottle (no model-specific steps)

対応するフィルムとインク

メーカーがこの機種を挙げているフィルム

当社の表には、この機種を挙げているフィルムメーカーがありません。給紙できる耐水性のインクジェットフィルムなら使えます。比較はこちら: インクジェットフィルムの表.

販売店がこの機種を挙げている黒インク

  • Black Dye Screenprinting Ink for Film Positives and Negatives (InkOwl)
    対象機種: “'all EPSON desktop and wide format printers'; Canon PRO-100, PRO-200, iX6820, iP8720. 140 mL version: T3170x, ET-8550 and other EcoTanks (compatible-printers tab lists ET-2800/2850, ET-4850, L14150, L18050/L8050, L8180, ET-16xxx)” · inkowl.com · 確認 2026-11-01

全色黒インクの表 →

一般的なメッシュに合うLPI

メッシュと網点についての公開情報です。一般的な目安はメッシュ数がLPIの4~5倍で、範囲の端では出典ごとに食い違います。

メッシュ(本/インチ)LPI出典
150LX45–55Murakami, Smart Mesh S + LX · 確認 2026-11-01
16032–40ScreenPrinting.com blog · 確認 2026-11-01
16035Blue Cotton blog · 確認 2026-11-01
180LX45–55Murakami, Smart Mesh S + LX · 確認 2026-11-01
20050T-Biz Network · 確認 2026-11-01
23046–57ScreenPrinting.com help centre · 確認 2026-11-01
24055Murakami Screen · 確認 2026-11-01
30555Blue Cotton blog · 確認 2026-11-01
35585KIWO ExpoCheck · 確認 2026-11-01

すべての行と目安(注記付き) → · メッシュ ↔ LPI計算 →

既知の問題

  • No model-specific conversion steps found: InkOwl lists the L18050 as compatible but publishes no steps for it.
  • Freehand's AccuRIP does not list the L18050 or the ET-18100.

Zorofilmでの出力

  • ZorofilmはMacまたはWindowsから、USBかネットワーク経由でL18050に直接フィルムを送ります:インクごとに1ビットのフィルムを1枚、トンボとラベル付きで。
  • アプリではこのプロファイルを「未検証」と表示します。ジョブの前にテストフィルムを出力して確認してください。
  • 黒インク:アプリの初期設定は全チャンネル(すべてのタンクまたはカートリッジに黒を入れたプリンター)、もう一方のキットは1チャンネルのみ(K)です。どちらも「Epsonで出力」にあります。
  • 印刷モード:1440 × 1440 dpi, 1440 × 720 dpi, 720 × 720 dpi。
  • 印刷幅は最大329 mm。それより幅の広いアートは複数のフィルムに分割します。
  • インク濃度は1×から始まり、3×まで上げられます。設定を決めるため、プリンター・インク・フィルムの組み合わせごとに一度、「ヘルプ」からアプリの2種類のテストフィルム(濃度ラダーとステップウェッジ)を出力してください。
  • インクごとのPDF(原寸)やPNGの書き出し、フィルムごとのプリンターファイルの保存もできます。

よくある質問

Is the ET-18100 the same printer as the L18050?
They share an SKU base (C11CK38401 and C11CK38402). Epson does not say they are the same, so treat it as our inference. PrintFab's silkscreen list names both.
Does the L18050 replace the L1800?
Epson India names it as the L1800 replacement. It keeps six dye inks and the A3+ size.
Why is it experimental in Zorofilm?
The profile's head comes from the XP-8500 as the nearest model in Gutenprint; the L18050 itself is not in Gutenprint 5.3.5. Nobody has measured it on hardware for Zorofilm yet.

出典

日付の記載がない限り、2026-11-01に確認した情報です。価格や対応状況は変わります。最終的には販売店のページが正です。

  1. EU L18050 · 確認 2026-11-01
  2. EU ET-18100 · 確認 2026-11-01
  3. India L18050 · 確認 2026-11-01
  4. PrintFab · 確認 2026-11-01
  5. InkOwl compatible list · 確認 2026-11-01