Skip to content

Spot, index and simulated process separations, explained

Spot separations print each colour from its own screen, as solids and halftoned tints; index separations dither the image into square pixels of a fixed set of inks; simulated process overprints halftones of a few opaque inks to imitate a photo. Zorofilm makes spot separations today; index and simulated process are not in the app yet.

3 min bacaan · Dikemas kini 2026-11-07 · Zorofilm

What is a spot separation?

One screen per ink. Solid areas print solid, and tints or gradients of that ink become halftone dots. It suits logos, type, vector art and most flat illustration, which is most of what small shops print. UltraSeps' published film settings use 26° at 300 LPI for solids only (in effect, no visible dots) and 26° at 50 LPI with an elliptical dot when there are tints, on 156–200 mesh without a white base and 200–305 for top colours over a base.

What is an index separation?

Every pixel gets exactly one ink, as square pixels of equal size from a diffusion dither, sitting next to each other without overprinting. Because nothing overprints, small registration errors matter less, but it needs more inks than a halftone job. T-Biz recommends 180–200 dpi for most work and 200–225 dpi for photorealistic work, says that above 225 dpi the dots are too small to burn, and suggests a palette of at least 6–8 colours. Index separations goes further.

What is simulated process?

A photo-like print from a handful of opaque inks, usually over a white base on a dark garment, with every ink halftoned and overprinted. The published settings use one angle for all films: UltraSeps gives 26° at 55 LPI with an elliptical dot and top colours on 280–305 mesh; Fresener's T-Biz method gives 25° at 55 LPI on a manual press and 65 LPI on an automatic. None of the separation vendors publishes how its software chooses or mixes the inks.

Which one fits which job?

  • Flat colours, logos, type: spot.
  • A photo in one colour: one spot ink with the tones as a halftone.
  • Raster illustration with many colours, on a press with enough heads: index.
  • Photos and painted art on dark garments: simulated process.

What does Zorofilm do today?

Spot separations: inks found in the artwork automatically, or taken from the file's own spot channels and spot colours, plus a white underbase with choke, highlight white, trapping and halftones. When art looks like a photo or painted art, the app says so: spot inks will posterise it, and simulated process is planned, not in this version. Index separations are not in the app yet either. For those jobs keep your current separation tool; if it saves a PSD with spot channels, Zorofilm can make the films from it (PSD with spot channels).

Sumber

  1. S. Roginski, “Suggested Film Output Settings”, UltraSeps (PDF) · diambil 2026-11-01
  2. T-Biz Network, “Index Color Separations for Screen Printing” · diambil 2026-11-01
  3. S. Fresener, “Simulated Process Color Separations – Part Two”, T-Biz Network, 2018 · diambil 2026-11-01

Buntu tentang perkara lain? Tanya — pasukan Zorofilm menjawab setiap soalan.

Tanya soalan

Panduan cetakan saring baharu terus ke peti masuk anda

Kira-kira satu e-mel sebulan: panduan baharu, penyelesaian kepada masalah yang orang tanyakan, dan berita Zorofilm.

Kira-kira satu e-mel sebulan dengan panduan cetakan saring baharu dan berita Zorofilm. Kami akan menghantar pautan pengesahan ke e-mel anda terlebih dahulu, dan anda boleh berhenti melanggan pada bila-bila masa. Dasar privasi

Cuba pada reka bentuk anda sendiri

Zorofilm melakukan apa yang diterangkan oleh panduan ini: pemisahan warna, underbase, trap, halftone dan filem, dicetak pada Epson anda atau dieksport. Pelan Free membuat 10 filem sebulan, cetakan terus termasuk.