Skip to content
Beta

Epson ET-8550 film positive printer: all-black setup

BetaEpson EcoTank Photo ET-8550

Zorofilm has a print profile for this model (head data from Gutenprint, or measured on a twin model), and shops demonstrably print film on it. Not yet tested with all-black film in Zorofilm.

Our data rates this model as the first candidate for Supported: a head measured on hardware, a vendor-documented all-black route and a current Epson model. ‘Supported’ appears only after Zorofilm's own all-black density and registration test on the printer. Until then it is Beta.

Short answer

The ET-8550 (sold as the L8180 in Europe and India) is the A3+ EcoTank that film-printer sellers name most often: Freehand puts it in AccuRIP's top four, Lawson builds a package on it, and InkOwl and Absolute Inkjet sell black ink for it. Shops fill all six tanks with black dye, or only the photo-black one. Zorofilm prints to it directly in beta.

Feeding film on the ET-8550

Epson's user's guide allows user-defined sizes up to 13 × 78.7 in, and the EU product page lists media up to 1.3 mm thick and 2 m long. Epson's FAQ says the rear straight path takes thick media of 0.61–1.3 mm, one sheet at a time. We found no report of the sensor missing clear film on this model.

Six tanks of black, or one

Lawson's SP-1319 package ships six 70 mL bottles of all-black ink, one per tank. Freehand suggests Dmax in the photo-black slot only while the warranty runs, then every slot. Your choice decides the kit you pick in Zorofilm: every channel, or one channel.

Channels and specs

Format
A3+
Channels
6: BK (pigment), PB photo black (dye), C (dye), M (dye), Y (dye), GY (dye)
Nozzles
360 black, 180 per colour (Epson EU)
Max width
330.2 mm / 13 in — 13 x 19 in max sheet; mm computed.
Max length
2000 mm / 78.7 in — User-defined paper size up to 13 x 78.7 in (Epson user's guide); EU page: media up to 1.3 mm thick and 2 m long.
Roll
No
Ink system
tank (EcoTank bottles, 552 series in US)
Epson status
US: current · EU: current · India: current (L8180)
Film RIP listings
AccuRIP: Windows Select Tank yes / ABI no; Mac Select Tank yes (13x19 only) / ABI no · PrintFab: listed · Fiery FilmMaker v11: listed

L8180: EU (C11CJ21402), India (C11CJ21502), Asia. Epson publishes one user's guide for ET-8500/8550/L8160/L8180; identical EU specs. Twin status inferred, Epson states no equivalence.

All-black conversion routes

How sellers put black ink in this printer. The steps are each vendor's own: follow them on the vendor's page; we do not repeat or change them.

  1. Black dye in every tank

    Lawson SP-1319 package (six 70 mL all-black bottles); InkOwl 140 mL IEP-140FPK bottle — Lawson package $1,999 on 2026-11-01

  2. Black in the photo-black slot only

    Freehand (AccuRIP Select Tank) — Dmax in PK only during warranty, then all slots

Films and inks for it

Films whose maker names this model

No film maker in our table names this model. Any waterproof inkjet film that fits the feed will do; compare them in the inkjet films table.

Black inks whose seller names this model

  • Black Dye Screenprinting Ink for Film Positives and Negatives (InkOwl)
    Named for: “'all EPSON desktop and wide format printers'; Canon PRO-100, PRO-200, iX6820, iP8720. 140 mL version: T3170x, ET-8550 and other EcoTanks (compatible-printers tab lists ET-2800/2850, ET-4850, L14150, L18050/L8050, L8180, ET-16xxx)” · inkowl.com · read 2026-11-01
  • ScreenMate Film Printer Ink / ScreenMate Film Output Black Ink (Graphics One (per Kolormatrix))
    Named for: “ScreenMate SP-1319 (ET-8550), SP-2400, ET-15000; 'EPSON EcoTank color separation printers'” · lawsonsp.com · read 2026-11-01
  • Absolute Black VET (Absolute Inkjet)
    Named for: “ET-8500, ET-8550, T3170x (140 mL and 1 L bottles)” · whattheythink.com · read 2026-11-01

All-black inks table →

LPI for common meshes

What mesh and halftone sources publish. The usual rule is a mesh count of 4 to 5 times the LPI; the sources disagree at the edges.

Mesh (threads/in)LPISource
150LX45–55Murakami, Smart Mesh S + LX · read 2026-11-01
16032–40ScreenPrinting.com blog · read 2026-11-01
16035Blue Cotton blog · read 2026-11-01
180LX45–55Murakami, Smart Mesh S + LX · read 2026-11-01
20050T-Biz Network · read 2026-11-01
23046–57ScreenPrinting.com help centre · read 2026-11-01
24055Murakami Screen · read 2026-11-01
30555Blue Cotton blog · read 2026-11-01
35585KIWO ExpoCheck · read 2026-11-01

Every row and rule, with notes → · Mesh ↔ LPI calculator →

Known issues

  • Freehand's Mac support for the ET-8550 is limited to 13 × 19 in sheets (AccuRIP compatibility table).
  • Epson's EU page gives the BK channel 360 nozzles and each colour 180, while Zorofilm's print profile drives 180 nozzles on every channel. Check a test film before you rely on the BK-only kit.
  • Freehand lists the L8180 as community-provided, not tested by Freehand itself.

Printing it with Zorofilm

  • Zorofilm sends the films to the ET-8550 itself, over USB or the network, from Mac or Windows: one 1-bit film per ink, with registration marks and labels.
  • Black ink: the app starts on every channel (a printer with black in every tank or cartridge); the other kit is one channel only (BK). Both are under ‘Print on your Epson’.
  • Print modes: 1440 × 1440 dpi, 1440 × 720 dpi, 720 × 720 dpi.
  • Print width up to 329 mm; wider art is tiled across several films.
  • Ink density starts at 1× and goes up to 3×. Print the app's two test films from Help (a density ladder and a step wedge) once per printer, ink and film to find your setting.
  • You can also export per-ink PDF (exact scale) or PNG, or save one printer file per film.

Frequently asked questions

Is the L8180 the same printer as the ET-8550?
Epson publishes one user's guide for the ET-8500, ET-8550, L8160 and L8180, and the EU specifications match. Epson does not call them twins, so this is our inference. Zorofilm has an L8180 profile with the same head as its ET-8550 profile.
Why is the ET-8550 Beta and not Supported?
Its head offsets were measured on a real L8180 on 23 September 2026, a kit vendor documents the all-black route, and Epson still sells it. What is missing is Zorofilm's own all-black density and registration test on the printer. Until that passes, the page says Beta.
How large a film can the ET-8550 print?
Sheets up to 13 × 19 in, and user-defined lengths up to 78.7 in per Epson. Zorofilm's profile prints up to 329 mm wide; larger art can be tiled across several films.

Sources

Read on 2026-11-01 unless a date says otherwise. Prices and statuses change; the vendor's page is the authority.

  1. US product page, status · read 2026-11-01
  2. US spec sheet: 6 colours, 13x19, user-defined size · read 2026-11-01
  3. Shared ET-8500/8550/L8160/L8180 user's guide specs · read 2026-11-01
  4. EU ET-8550 page: inks, nozzles, 1.3 mm / 2 m media · read 2026-11-01
  5. EU L8180 page · read 2026-11-01
  6. India L8180 · read 2026-11-01
  7. Rear thick-media slot FAQ · read 2026-11-01
  8. ET-8550 film package, all-black bottles · read 2026-11-01
  9. InkOwl 140 mL bottle for ET-8550/T3170x · read 2026-11-01
  10. AccuRIP support and PK-only advice · read 2026-11-01
  11. PrintFab listing · read 2026-11-01
  12. FilmMaker listing · read 2026-11-01