Why does the shape matter?
Garment printing gains a lot: Coudray (Screen Printing, 2007) calls a dot gain of 35 % or more “extremely common” in textile printing, against about 20 % in graphics, and a 30 % gain turns a 50 % dot into an 80 % print. On top of that comes the midtone jump: where the corners of neighbouring dots touch, the tone suddenly darkens. The shape decides where and how sharply that happens.
How do the shapes behave?
- Round: a circle. Neighbours touch at about 78.5 %, where circles in a square grid meet; the dark holes left in the shadows are not round and tend to fill first.
- Elliptical or chain: joins in two steps, at about 40 % along one axis and 60 % along the other, which spreads the jump out; Coudray credits this with removing the midtone jump.
- Square and diamond: join on all four sides at 50 %; Coudray puts the jump of square dots at about 10–12 % even under ideal conditions.
- Euclidean (round–square): round in the highlights, a checkerboard at 50 %, round holes in the shadows.
- Line: rows instead of dots, for effects.
- FM or stochastic: no angle and no ruling; spot size and gain correction are critical, and screen printing has fewer interference problems with it (UGRA, 1995).
Which shapes do published settings use?
- UltraSeps: elliptical, for simulated process and for spot tints.
- Fresener (T-Biz): elliptical guidance for simulated process.
- The Separation Studio manual, as a user quotes it on TheShirtBoard: round dot, 45 LPI, 22.5°, 230 mesh.
Which shapes does Zorofilm have?
Round (the default), Elliptical, Diamond (square) and Line, in the Halftone tab. One honest detail: Zorofilm's Elliptical is an elongated round dot that we measured joining at about 52 % along one axis and 92 % along the other, not the classic chain dot that joins at 40 % and 60 %. Euclidean and a true chain dot are planned and not in the app yet. Turn the loupe on in the preview to see the real dots of every film before you print.
How do you choose?
- Spot tints and small fades: round.
- Smooth gradients and skin tones: a chain or elliptical dot where your software has one.
- Effects: line.
- Whatever you pick, print a test with a gradient before a big run and look at the midtones on the garment. The step wedge shows the same patches on film.
Šaltiniai
- M. Coudray, “Understanding the Behavior of Midtone Dot Gain”, Screen Printing, 2007 · žiūrėta 2026-11-01
- S. Roginski, “Suggested Film Output Settings”, UltraSeps (PDF) · žiūrėta 2026-11-01
- S. Fresener, “Simulated Process Color Separations – Part Two”, T-Biz Network, 2018 · žiūrėta 2026-11-01
- TheShirtBoard, “Sim. angles and dpi”, 2014 · žiūrėta 2026-11-01
- UGRA, “Application of Stochastic Screening in Different Printing Processes”, 1995 · žiūrėta 2026-11-01
Įstrigai kitur? Klausk — Zorofilm komanda atsako į kiekvieną klausimą.
Užduoti klausimąNauji šilkografijos gidai tavo el. pašte
Maždaug vienas el. laiškas per mėnesį: nauji gidai, sprendimai problemoms, apie kurias klausia žmonės, ir Zorofilm naujienos.
