What do the sources say?
- Mesh = 4–5 × LPI: ScreenPrinting.com help centre, Fresener (T-Biz), Blue Cotton.
- LPI = mesh ÷ 5, or ÷ 4 for a well dialled-in darkroom: ScreenPrinting.com blog.
- Mesh = LPI × 4 to 4.5, with at least four mesh openings per dot, and only at angles that work: Murakami.
- × 3.5 and × 4 as minimums, from an author who calls relying on rules of thumb “pointless”: Screen Printing magazine, 2003.
- At least 3.5 : 1, 4.5 : 1 as “international practice”, 5 : 1 for colour halftones: ZXC Print, a supplier, kept as a disagreeing data point.
They disagree partly because mesh is less regular than its number: nominal counts are rounded from metric, the weft varies by 5–7 %, and a 305 mesh at tension may be about 290 threads per inch (Screen Printing magazine, 2003). The angle matters too; see avoiding moiré.
Mesh to LPI, as published
- 150 and 180 thin-thread (LX) mesh: 45–55 LPI (Murakami).
- 160 mesh: 32–40 LPI, ÷ 5 to ÷ 4 (ScreenPrinting.com blog); 35 LPI, “about the lowest most shops use” (Blue Cotton).
- 180–225 mesh: 45 LPI, with 230 suggested for more margin (ScreenPrinting.com help centre).
- 200 mesh: 50 LPI (T-Biz).
- 205–255 mesh: 45 LPI as the process minimum (Blue Cotton).
- 230 mesh: 46–57 LPI (ScreenPrinting.com help centre).
- 230–265 mesh: 65 LPI, at 3.5× and 4× (Screen Printing magazine, 2003).
- 240 mesh: 55 LPI, Murakami's worked example.
- 305 mesh: 55 LPI (Blue Cotton; 5.5×, outside its own rule).
- 355 mesh: 85 LPI, KIWO's ExpoCheck example.
The full table with every source and date is on mesh and LPI, and the mesh ↔ LPI calculator does the arithmetic for your mesh.
How fine should textile halftones be?
Screen Printing magazine (Coudray, 2002) calls 40–65 LPI generally appropriate for textiles, at least 10 LPI lower on sweatshirts, and gives a “rule of 240”: 240 ÷ LPI is roughly the viewing distance in feet. Fresener suggests 35–45 LPI for cartoon work, 55 LPI on a manual press and 65 on an automatic.
What is the smallest dot a mesh holds?
- Two mesh openings plus two thread diameters, or twice the total screen thickness (Dennings, SGIA Journal 1998, hosted by KIWO).
- Two thread diameters plus one mesh opening (Coates).
- At least four mesh openings per dot (Murakami).
- Holding an 8 % dot consistently is high quality (Blue Cotton).
In Zorofilm, Halftone → Smallest dot is From mesh by default: an estimate from two threads plus one opening, using typical thread sizes rather than your mesh's datasheet, and the app marks it as an estimate. Tones below it are dropped and the check strip says so; anything above Solid above (95 % by default) prints solid.
What does Zorofilm check?
- Under Halftone, the suggestion for your mesh: about mesh ÷ 4.5 LPI, for example 51 LPI on 230 mesh.
- Amber when mesh ÷ LPI is under 4: small dots may not hold.
- Red when it is under 3.5: too fine for that mesh.
- Red when the angle is within 5° of the mesh threads or knuckles (0°, 45°, 90°).
Šaltiniai
- ScreenPrinting.com help centre, “What mesh count should I use for halftones?” · žiūrėta 2026-11-01
- ScreenPrinting.com blog, “A Crash Course in Halftones” · žiūrėta 2026-11-01
- S. Fresener, “All About DPI, LPI, PPI & More”, T-Biz Network, 2015 · žiūrėta 2026-11-01
- Blue Cotton blog, halftone screen printing · žiūrėta 2026-11-01
- Murakami Screen, “How to prevent moiré” · žiūrėta 2026-11-01
- Murakami Screen, Smart Mesh S + LX · žiūrėta 2026-11-01
- Screen Printing magazine, “All Things Are Not as They Appear”, 2003 · žiūrėta 2026-11-01
- ZXC Print, elimination of moiré patterns (supplier article) · žiūrėta 2026-11-01
- Screen Printing magazine (M. Coudray), October 2002 · žiūrėta 2026-11-01
- D. Dennings, “Understanding Mesh Geometry”, SGIA Journal 1998 (hosted by KIWO, PDF) · žiūrėta 2026-11-01
- Coates Screen Inks (H. de Groote), “Process printing with UV inks” (PDF) · žiūrėta 2026-11-01
- KIWO, ExpoCheck · žiūrėta 2026-11-01
Įstrigai kitur? Klausk — Zorofilm komanda atsako į kiekvieną klausimą.
Užduoti klausimąNauji šilkografijos gidai tavo el. pašte
Maždaug vienas el. laiškas per mėnesį: nauji gidai, sprendimai problemoms, apie kurias klausia žmonės, ir Zorofilm naujienos.
