Skip to content

Index separations for screen printing: how they work

An index separation turns the image into square pixels, each printed in exactly one ink from a fixed palette, with no screen angle and no overprint. Published practice is 180–225 dpi on 180–305 mesh with 6–10 colours. Zorofilm does not make index separations yet; this guide explains them so you can judge a file or a tool.

3 min lasīšana · Atjaunināts 2026-11-07 · Zorofilm

How is index different from a halftone?

A halftone varies the dot size at a fixed ruling and angle; an index separation keeps every pixel the same square size and varies which ink it gets. Colours mix side by side in the eye instead of on top of each other. There is no screen angle, so no angle moiré between inks, and a small registration error shifts whole pixels instead of opening gaps.

What resolution, mesh and palette do sources give?

  • Resolution: 180–200 dpi for most work, 200–225 dpi for photorealistic work; above 225 dpi the dots are too small to burn (T-Biz).
  • Mesh: 180–305, with 280–305 at 200 dpi (T-Biz).
  • Palette: at least 6–8 colours, the best results with 8–10, and black in the palette even when it is not printed (T-Biz).
  • Underbase: a dithered greyscale base at the index resolution with a 10–90 % tone curve, or a halftone base and highlight at 55 LPI and 25° (T-Biz); UltraSeps gives 50 LPI at 26° for base and highlight.

Why can't you resize an index file afterwards?

The dither is the separation. Resampling smears the square pixels into blends, and a tone curve applied to the finished plates breaks the palette. A change of size or colour means picking the colours again and separating again (T-Biz).

Why should the index pixel divide the printer's resolution?

This is arithmetic, not a published rule. A film printer places dots on a fixed grid, so a 200 dpi index pixel on a 1440 dpi film is 7.2 printer dots wide: the pixels alternate between 7 and 8 dots, which can show as banding. Resolutions that divide the grid exactly avoid it: 1440 ÷ 8 = 180 dpi, 1440 ÷ 6 = 240 dpi, 720 ÷ 3 = 240 dpi.

Can Zorofilm make index films?

Not yet: Zorofilm's separations are spot separations with halftones. For index jobs, keep your current separation tool. This guide is updated when that changes. For the separation types side by side, see spot, index and simulated process.

Avoti

  1. T-Biz Network, “Index Color Separations for Screen Printing” · skatīts 2026-11-01
  2. S. Roginski, “Suggested Film Output Settings”, UltraSeps (PDF) · skatīts 2026-11-01

Iestrēdzis pie kā cita? Jautā — Zorofilm komanda atbild uz katru jautājumu.

Uzdot jautājumu

Jauni sietspiedes ceļveži tavā e-pastā

Apmēram viens e-pasts mēnesī: jauni ceļveži, risinājumi problēmām, par kurām cilvēki jautā, un Zorofilm jaunumi.

Apmēram viens e-pasts mēnesī ar jauniem sietspiedes ceļvežiem un Zorofilm jaunumiem. Vispirms mēs tev e-pastā nosūtīsim apstiprinājuma saiti, un abonementu vari atsaukt jebkurā laikā. Privātuma politika

Izmēģini ar savu maketu

Zorofilm dara to, ko skaidro šie ceļveži: krāsu atdalīšanu, pamatkārtu, trapping, rastru un plēves, drukātas uz tava Epson vai eksportētas. Free plāns dod 10 plēves mēnesī, tiešā druka iekļauta.