Skip to content

Index separations for screen printing: how they work

An index separation turns the image into square pixels, each printed in exactly one ink from a fixed palette, with no screen angle and no overprint. Published practice is 180–225 dpi on 180–305 mesh with 6–10 colours. Zorofilm does not make index separations yet; this guide explains them so you can judge a file or a tool.

3 分で読めます · 更新 2026-11-07 · Zorofilm

How is index different from a halftone?

A halftone varies the dot size at a fixed ruling and angle; an index separation keeps every pixel the same square size and varies which ink it gets. Colours mix side by side in the eye instead of on top of each other. There is no screen angle, so no angle moiré between inks, and a small registration error shifts whole pixels instead of opening gaps.

What resolution, mesh and palette do sources give?

  • Resolution: 180–200 dpi for most work, 200–225 dpi for photorealistic work; above 225 dpi the dots are too small to burn (T-Biz).
  • Mesh: 180–305, with 280–305 at 200 dpi (T-Biz).
  • Palette: at least 6–8 colours, the best results with 8–10, and black in the palette even when it is not printed (T-Biz).
  • Underbase: a dithered greyscale base at the index resolution with a 10–90 % tone curve, or a halftone base and highlight at 55 LPI and 25° (T-Biz); UltraSeps gives 50 LPI at 26° for base and highlight.

Why can't you resize an index file afterwards?

The dither is the separation. Resampling smears the square pixels into blends, and a tone curve applied to the finished plates breaks the palette. A change of size or colour means picking the colours again and separating again (T-Biz).

Why should the index pixel divide the printer's resolution?

This is arithmetic, not a published rule. A film printer places dots on a fixed grid, so a 200 dpi index pixel on a 1440 dpi film is 7.2 printer dots wide: the pixels alternate between 7 and 8 dots, which can show as banding. Resolutions that divide the grid exactly avoid it: 1440 ÷ 8 = 180 dpi, 1440 ÷ 6 = 240 dpi, 720 ÷ 3 = 240 dpi.

Can Zorofilm make index films?

Not yet: Zorofilm's separations are spot separations with halftones. For index jobs, keep your current separation tool. This guide is updated when that changes. For the separation types side by side, see spot, index and simulated process.

出典

  1. T-Biz Network, “Index Color Separations for Screen Printing” · 取得 2026-11-01
  2. S. Roginski, “Suggested Film Output Settings”, UltraSeps (PDF) · 取得 2026-11-01

ほかに困っていることはありますか?質問してください。Zorofilmチームがすべての質問に回答します。

質問する

新しいスクリーン印刷ガイドをメールでお届け

月1通ほどのメールで、新しいガイド、よく寄せられるトラブルの解決策、Zorofilmのお知らせをお届けします。

新しいスクリーン印刷ガイドとZorofilmのお知らせを月1通ほどお届けします。まず確認用のリンクをメールでお送りします。配信はいつでも停止できます。 プライバシーポリシー

ご自身のアートワークで試してみましょう

Zorofilmは、これらのガイドで説明していることを実行します:色分解、白下地、トラッピング、網点、フィルムを、Epsonで出力または書き出し。Freeプランは毎月10枚、直接出力も含みます。