Skip to content

Index separations for screen printing: how they work

An index separation turns the image into square pixels, each printed in exactly one ink from a fixed palette, with no screen angle and no overprint. Published practice is 180–225 dpi on 180–305 mesh with 6–10 colours. Zorofilm does not make index separations yet; this guide explains them so you can judge a file or a tool.

3 분 분량 · 업데이트 2026-11-07 · Zorofilm

How is index different from a halftone?

A halftone varies the dot size at a fixed ruling and angle; an index separation keeps every pixel the same square size and varies which ink it gets. Colours mix side by side in the eye instead of on top of each other. There is no screen angle, so no angle moiré between inks, and a small registration error shifts whole pixels instead of opening gaps.

What resolution, mesh and palette do sources give?

  • Resolution: 180–200 dpi for most work, 200–225 dpi for photorealistic work; above 225 dpi the dots are too small to burn (T-Biz).
  • Mesh: 180–305, with 280–305 at 200 dpi (T-Biz).
  • Palette: at least 6–8 colours, the best results with 8–10, and black in the palette even when it is not printed (T-Biz).
  • Underbase: a dithered greyscale base at the index resolution with a 10–90 % tone curve, or a halftone base and highlight at 55 LPI and 25° (T-Biz); UltraSeps gives 50 LPI at 26° for base and highlight.

Why can't you resize an index file afterwards?

The dither is the separation. Resampling smears the square pixels into blends, and a tone curve applied to the finished plates breaks the palette. A change of size or colour means picking the colours again and separating again (T-Biz).

Why should the index pixel divide the printer's resolution?

This is arithmetic, not a published rule. A film printer places dots on a fixed grid, so a 200 dpi index pixel on a 1440 dpi film is 7.2 printer dots wide: the pixels alternate between 7 and 8 dots, which can show as banding. Resolutions that divide the grid exactly avoid it: 1440 ÷ 8 = 180 dpi, 1440 ÷ 6 = 240 dpi, 720 ÷ 3 = 240 dpi.

Can Zorofilm make index films?

Not yet: Zorofilm's separations are spot separations with halftones. For index jobs, keep your current separation tool. This guide is updated when that changes. For the separation types side by side, see spot, index and simulated process.

출처

  1. T-Biz Network, “Index Color Separations for Screen Printing” · 확인 2026-11-01
  2. S. Roginski, “Suggested Film Output Settings”, UltraSeps (PDF) · 확인 2026-11-01

다른 문제로 막히셨나요? 물어보세요. Zorofilm 팀이 모든 질문에 답합니다.

질문하기

새 실크스크린 인쇄 가이드를 이메일로 받아 보세요

한 달에 이메일 한 통 정도: 새 가이드, 많이들 묻는 문제의 해결법, Zorofilm 소식을 보내 드려요.

새 실크스크린 인쇄 가이드와 Zorofilm 소식을 한 달에 이메일 한 통 정도 보내 드려요. 먼저 확인 링크를 이메일로 보내 드리며, 언제든지 구독을 해지할 수 있어요. 개인정보 처리방침

내 아트워크로 직접 해 보세요

Zorofilm은 이 가이드에서 설명하는 일을 해냅니다: 색분해, 언더베이스, 트래핑, 망점과 필름을 Epson으로 출력하거나 내보냅니다. Free 요금제로 매달 필름 10장, 직접 출력 포함.