Skip to content

Moving from Photoshop actions and plug-ins to Zorofilm

If you separate in Photoshop, by hand, with actions, or with T-Seps or UltraSeps, Zorofilm replaces the steps after the channels: halftones, marks, labels and printing. For spot jobs it can replace the separation as well; simulated process stays in your plug-in for now.

3 min lasīšana · Atjaunināts 2026-11-07 · Zorofilm
Īsumā
  1. Keep your plug-in and save the separation as a PSD with spot channels
  2. Open the PSD in Zorofilm: one film per channel
  3. Set the halftone you used in Bitmap mode
  4. Compare the films with your old ones
  5. Try a spot job from the original artwork, without Photoshop

What does the Photoshop route look like?

  1. One spot channel per ink, by hand or by a plug-in.
  2. Each channel turned into dots with Image › Mode › Bitmap › Halftone Screen, with a frequency, angle and shape. T-Seps has a “RIP routine” that does this; UltraSeps documents printing halftone films straight from Photoshop.
  3. Registration marks and labels, added by hand or by an action.
  4. Each film printed through the printer driver, with the right scale and density settings.

What does Zorofilm replace?

  • Steps 2 to 4: open the PSD with its spot channels and Zorofilm halftones each channel, adds marks and label, and prints one film per sheet in order (PSD guide).
  • Step 1, for spot jobs: open the original artwork and Zorofilm separates it into spot inks with underbase, choke and trap.
  • The driver settings: Zorofilm prints directly to converted Epsons with its own ink density, or exports exact-size PDFs for any printer.

What stays in Photoshop?

  • Simulated process: Zorofilm does not make it yet.
  • Index separations, for the same reason (index separations).
  • Retouching and cleaning up artwork.

What do the tools cost?

  • Photoshop: €26.43 a month including VAT on adobe.com in our Romanian test locale, annual plan billed monthly (checked 2026-11-01).
  • T-Seps 4.0: $345 one-time, and it needs an English-language Photoshop (T-Biz store, checked 2026-11-01).
  • UltraSeps v3: $399 one-time, Photoshop required (UltraSeps, checked 2026-11-01).
  • Zorofilm: a Free plan with 10 films a month; the paid plans are on pricing.

How do you switch?

  1. Keep your plug-in. Save the separated file as a PSD with its spot channels, 8 or 16 bit, with Maximize compatibility on.
  2. Open it in Zorofilm and set the halftone you used in Bitmap mode (LPI, angle, dot) in the Halftone tab.
  3. Compare the films with your old ones on a light table.
  4. Print the density test once and set the ink density.
  5. Try one spot job from the original artwork, without Photoshop.

Side by side: Zorofilm vs Photoshop plug-ins.

Avoti

  1. Adobe, Photoshop plans (Romanian locale, incl. VAT) · skatīts 2026-11-01
  2. T-Biz Network store, T-Seps · skatīts 2026-11-01
  3. UltraSeps v3 product page · skatīts 2026-11-01

Iestrēdzis pie kā cita? Jautā — Zorofilm komanda atbild uz katru jautājumu.

Uzdot jautājumu

Jauni sietspiedes ceļveži tavā e-pastā

Apmēram viens e-pasts mēnesī: jauni ceļveži, risinājumi problēmām, par kurām cilvēki jautā, un Zorofilm jaunumi.

Apmēram viens e-pasts mēnesī ar jauniem sietspiedes ceļvežiem un Zorofilm jaunumiem. Vispirms mēs tev e-pastā nosūtīsim apstiprinājuma saiti, un abonementu vari atsaukt jebkurā laikā. Privātuma politika

Izmēģini ar savu maketu

Zorofilm dara to, ko skaidro šie ceļveži: krāsu atdalīšanu, pamatkārtu, trapping, rastru un plēves, drukātas uz tava Epson vai eksportētas. Free plāns dod 10 plēves mēnesī, tiešā druka iekļauta.