Skip to content

Moving from Photoshop actions and plug-ins to Zorofilm

If you separate in Photoshop, by hand, with actions, or with T-Seps or UltraSeps, Zorofilm replaces the steps after the channels: halftones, marks, labels and printing. For spot jobs it can replace the separation as well; simulated process stays in your plug-in for now.

3 분 분량 · 업데이트 2026-11-07 · Zorofilm
요약
  1. Keep your plug-in and save the separation as a PSD with spot channels
  2. Open the PSD in Zorofilm: one film per channel
  3. Set the halftone you used in Bitmap mode
  4. Compare the films with your old ones
  5. Try a spot job from the original artwork, without Photoshop

What does the Photoshop route look like?

  1. One spot channel per ink, by hand or by a plug-in.
  2. Each channel turned into dots with Image › Mode › Bitmap › Halftone Screen, with a frequency, angle and shape. T-Seps has a “RIP routine” that does this; UltraSeps documents printing halftone films straight from Photoshop.
  3. Registration marks and labels, added by hand or by an action.
  4. Each film printed through the printer driver, with the right scale and density settings.

What does Zorofilm replace?

  • Steps 2 to 4: open the PSD with its spot channels and Zorofilm halftones each channel, adds marks and label, and prints one film per sheet in order (PSD guide).
  • Step 1, for spot jobs: open the original artwork and Zorofilm separates it into spot inks with underbase, choke and trap.
  • The driver settings: Zorofilm prints directly to converted Epsons with its own ink density, or exports exact-size PDFs for any printer.

What stays in Photoshop?

  • Simulated process: Zorofilm does not make it yet.
  • Index separations, for the same reason (index separations).
  • Retouching and cleaning up artwork.

What do the tools cost?

  • Photoshop: €26.43 a month including VAT on adobe.com in our Romanian test locale, annual plan billed monthly (checked 2026-11-01).
  • T-Seps 4.0: $345 one-time, and it needs an English-language Photoshop (T-Biz store, checked 2026-11-01).
  • UltraSeps v3: $399 one-time, Photoshop required (UltraSeps, checked 2026-11-01).
  • Zorofilm: a Free plan with 10 films a month; the paid plans are on pricing.

How do you switch?

  1. Keep your plug-in. Save the separated file as a PSD with its spot channels, 8 or 16 bit, with Maximize compatibility on.
  2. Open it in Zorofilm and set the halftone you used in Bitmap mode (LPI, angle, dot) in the Halftone tab.
  3. Compare the films with your old ones on a light table.
  4. Print the density test once and set the ink density.
  5. Try one spot job from the original artwork, without Photoshop.

Side by side: Zorofilm vs Photoshop plug-ins.

출처

  1. Adobe, Photoshop plans (Romanian locale, incl. VAT) · 확인 2026-11-01
  2. T-Biz Network store, T-Seps · 확인 2026-11-01
  3. UltraSeps v3 product page · 확인 2026-11-01

다른 문제로 막히셨나요? 물어보세요. Zorofilm 팀이 모든 질문에 답합니다.

질문하기

새 실크스크린 인쇄 가이드를 이메일로 받아 보세요

한 달에 이메일 한 통 정도: 새 가이드, 많이들 묻는 문제의 해결법, Zorofilm 소식을 보내 드려요.

새 실크스크린 인쇄 가이드와 Zorofilm 소식을 한 달에 이메일 한 통 정도 보내 드려요. 먼저 확인 링크를 이메일로 보내 드리며, 언제든지 구독을 해지할 수 있어요. 개인정보 처리방침

내 아트워크로 직접 해 보세요

Zorofilm은 이 가이드에서 설명하는 일을 해냅니다: 색분해, 언더베이스, 트래핑, 망점과 필름을 Epson으로 출력하거나 내보냅니다. Free 요금제로 매달 필름 10장, 직접 출력 포함.