Skip to content
Experimental

Epson SureColor P700 film positives on stock pigment ink

ExperimentalEpson SureColor P700 (SC-P700)

Zorofilm has a print profile, but its head is borrowed from the nearest model or flagged experimental, or the usual ink route differs from the profile's channel layout.

Short answer

The P700 is a current 13 in pigment printer with ten channels and roll feed. It is the current model shops run for film without converting it: Lawson sells it as a film printer on stock ink. Freehand warns that pigment on film is less dense and can scratch off. Zorofilm prints to it as experimental, on the stock photo black (PK) channel alone.

Pigment on film: what the sellers say

Freehand's help article says pigment is less dense than dye on film, can scratch off and struggles under strong LED exposure units; stock matte black (MK) rubs off, photo black (PK) is more stable. Lawson sells the P700 and P900 as film printers on stock ink. We found no Epson statement that the P700's black blocks UV; that claim is Lawson's.

Sizes and modes

Epson's spec sheet gives a 13 × 129 in printable area and a 13 in roll (2 in core); its media FAQ gives cut sheets of 279.4–1580 mm. Zorofilm's profile for this head offers 720 × 720 and 1440 × 720 dpi only.

Channels and specs

Format
A3+ (13 in)
Channels
10: C, LC, VM, VLM, Y, Gray, Light Gray, Violet, PK, MK
Nozzles
180 x 10 channels (PK and MK have dedicated nozzles)
Ink
UltraChrome PRO10 pigment
Max width
330 mm / 13 in — 13 in roll (2 in core, 84 mm max diameter)
Max length
3277 mm / 129 in — Max printable area 13 x 129 in; Epson FAQ cut sheet 279.4-1580 mm
Roll
Yes
Ink system
cartridge (25 mL)
Epson status
US: current · EU: current
Film RIP listings
AccuRIP: Windows Select Tank yes / ABI no; Mac Select Tank yes / ABI no · PrintFab: listed · Fiery FilmMaker v11: listed

All-black conversion routes

How sellers put black ink in this printer. The steps are each vendor's own: follow them on the vendor's page; we do not repeat or change them.

  1. Stock pigment black, no conversion

    Lawson sells P700 ($849) / P900 as film printers on stock ink; Freehand

Films and inks for it

Films whose maker names this model

  • Chromaline — AccuJet Water-Resistant Inkjet Film (made in the USA)
    Named for: “pigment and dye; Epson P700/P600, Canon PRO-300” · screenprintsupplies.com · read 2026-11-01

Black inks whose seller names this model

No ink seller in our table names this model; the route above uses the printer's own ink.

All-black inks table →

LPI for common meshes

What mesh and halftone sources publish. The usual rule is a mesh count of 4 to 5 times the LPI; the sources disagree at the edges.

Mesh (threads/in)LPISource
150LX45–55Murakami, Smart Mesh S + LX · read 2026-11-01
16032–40ScreenPrinting.com blog · read 2026-11-01
16035Blue Cotton blog · read 2026-11-01
180LX45–55Murakami, Smart Mesh S + LX · read 2026-11-01
20050T-Biz Network · read 2026-11-01
23046–57ScreenPrinting.com help centre · read 2026-11-01
24055Murakami Screen · read 2026-11-01
30555Blue Cotton blog · read 2026-11-01
35585KIWO ExpoCheck · read 2026-11-01

Every row and rule, with notes → · Mesh ↔ LPI calculator →

Known issues

  • Pigment on film is less dense, can scratch off and struggles under strong LED units; stock MK rubs off, PK is more stable (Freehand).
  • No Epson statement found that the P700's black is UV-blocking; that claim is Lawson's.
  • Freehand: third-party cartridges are not fully available, so it stays a pigment printer and prints slowly.

Printing it with Zorofilm

  • Zorofilm sends the films to the SC-P700 itself, over USB or the network, from Mac or Windows: one 1-bit film per ink, with registration marks and labels.
  • The app labels this profile ‘untested’: print a test film and check it before a job.
  • Black ink: the app starts on one channel only (PK); the other kit is every channel (a printer with black in every tank or cartridge). Both are under ‘Print on your Epson’.
  • Print modes: 1440 × 720 dpi, 720 × 720 dpi.
  • Print width up to 329 mm; wider art is tiled across several films.
  • Ink density starts at 1× and goes up to 3×. Print the app's two test films from Help (a density ladder and a step wedge) once per printer, ink and film to find your setting.
  • You can also export per-ink PDF (exact scale) or PNG, or save one printer file per film.

Frequently asked questions

Do I need to convert the P700 for film?
Not on the route Lawson sells: stock ink. Freehand's pigment caveats apply. No all-black dye kit for the P700 is in our data.
Which channel does Zorofilm print film with?
The photo black (PK) channel only. The app starts the P700 on its one-channel kit for that reason.
Why is the P700 experimental?
Zorofilm's profile borrows the SC-P800's head data from Gutenprint as the nearest model; the P700 itself is not in Gutenprint 5.3.5, and nobody has measured it for Zorofilm yet.

Sources

Read on 2026-11-01 unless a date says otherwise. Prices and statuses change; the vendor's page is the authority.

  1. P700 spec sheet · read 2026-11-01
  2. Media FAQ: cut-sheet length · read 2026-11-01
  3. EU SC-P700 · read 2026-11-01
  4. AccuRIP note · read 2026-11-01
  5. Pigment vs dye on film · read 2026-11-01