Skip to content
Free · no account

See your art as halftone dots.

Pick the LPI, angle, dot shape and film resolution. The dots come from the same halftone engine that makes Zorofilm's films.

Your file stays in this browser. It is never uploaded or stored; closing the tab forgets it.

Tones lighter than this drop out, as on a film made for a mesh that cannot hold them.

How to use it
  1. Drop a PNG, JPEG or WebP. It stays in your browser.
  2. Set the print width, film dpi, LPI, angle and dot shape.
  3. Press “Make the halftone” and zoom in to check the dots.
  4. Download the 1-bit PNG. It carries its dpi, so it opens at exact size.
Questions
Is my image uploaded?

No. It is read and screened by JavaScript in this tab. Nothing is sent to a server or stored, and closing the tab forgets it.

Which LPI should I use?

It depends on your mesh. The published rules of thumb put the mesh count at about 3.5 to 5 times the LPI; the mesh ↔ LPI calculator shows each rule with its source. Screen Printing magazine (2002) calls 40–65 LPI generally appropriate for textiles.

Why do angles like 0°, 45° and 90° warn?

Mesh threads run at 0° and 90°, with the knuckles at 45°, so halftone rows near those angles beat against the mesh and show moiré. The Zorofilm app starts at 22.5°; your own test films have the last word.

Which dot shapes are there?

Round, elliptical, diamond (square) and line: the four shapes the Zorofilm engine makes. The engine maps each shape so that a 30 % tone turns on 30 % of the film, whatever the shape.

Can I print this PNG as a film?

It opens at exact size, but it is one tone channel with no registration marks and no label. The app makes one film per ink with marks and labels and prints them on your Epson.

Make the real films in the app

Zorofilm separates your artwork, halftones every ink, adds registration marks and labels, and prints the films on your converted Epson. The Free plan makes 10 films a month.