Skip to content

Choose inkjet film for screen print positives

Buy a waterproof, microporous-coated inkjet film made for screen positives, usually about 5 mil (127 µm) thick, in your printer's sheet or roll size, and judge it by your own density test rather than the box. Published density figures mix UV and visual readings, so they cannot be compared.

3 phút đọc · Cập nhật 2026-11-07 · Zorofilm

What should you compare?

  • The coating. Most screen films are sold as waterproof or water-resistant, with a microporous or nanoporous coating that takes a lot of black. Not all: Handprinted's inkjet screen film says it must not get wet, and Prizma's film is water resistant only with pigment inks.
  • Thickness. Most of the films in our table that state one are 5 mil (127 µm) or 130 µm; Epson's Screen Positive Film is 5.3 mil and AWP's 4 mil.
  • Ink. Most say they take both dye and pigment ink; Ulano says the opacity comes from the ink deposit set in the RIP.
  • The coated side. Films are coated on one side; Lawson, for example, says to print on the matte side.
  • Size. Check your printer's sheet or roll width first; the film table lists each product's sheets and rolls.

Can you compare the density on the box?

Not really. Some makers give a UV density, some a visual (optical) one, and some do not say. Prizma's page gives the same film an optical density of 2.6 and a UV density above 4.0. Wasatch, a RIP maker, read the same roll at under 2.0 and over 4.5 depending on the printer's mode, and notes that higher density on inkjet film usually means more dot gain. The number that counts is the one you measure on your printer, ink and film.

What density do trade sources publish?

  • SPTF's capillary film troubleshooting sheet (hosted by KIWO): solid density 3.5 or higher, clear areas 0.3 or less, without saying whether UV or visual.
  • Screen Printing magazine (1999): film Dmax 3.0 or higher, Dmin ideally below 0.1; for inkjet film the UV-stopping ability matters, not visual opacity.
  • Wasatch: a UV Dmax of 2.5 is “high enough for nearly all screen printing”, and 3.0 or more for comfort.

Which films are listed?

The film table lists 18 inkjet films for screen positives, from Lawson, ScreenPrinting.com (Baselayr and Rite), Screen Print Direct, Fixxons, McLogan, Kolormatrix, AWP, Chromaline, Ultrafine, Epson, Ulano, Prizma, PosiPrint, MICRONOM PRO, Printbox, Handprinted and InkStar, each with thickness, coating, ink compatibility, density claim, sizes, a dated price snapshot and its source. Brands we looked for and could not read are listed as not found, not guessed.

How do you test a new film?

Print Zorofilm's density ladder on it, choose the density from that, and keep the film and the setting together: a new film brand means a new test. See film density test.

Nguồn

  1. Handprinted, Inkjet Screen Film · truy cập 2026-11-01
  2. Prizma Graphics, Positive Screen Inkjet Film · truy cập 2026-11-01
  3. Lawson, Water Resistant Inkjet Film for Film Positives · truy cập 2026-11-01
  4. Ulano, Pigment Inkjet Film · truy cập 2026-11-01
  5. Epson, Screen Positive Film · truy cập 2026-11-01
  6. SPTF, “Capillary Film Troubleshooting” (hosted by KIWO, PDF) · truy cập 2026-11-01
  7. F. Basch, “Densitometry: Your Guide to Print Quality”, Screen Printing, 1999 · truy cập 2026-11-01
  8. Wasatch SoftRIP help, colour separation linearity · truy cập 2026-11-01

Vướng chuyện khác? Cứ hỏi — đội Zorofilm trả lời mọi câu hỏi.

Đặt câu hỏi

Hướng dẫn in lụa mới, gửi thẳng vào hộp thư của bạn

Khoảng một email mỗi tháng: hướng dẫn mới, cách khắc phục những lỗi mọi người hay hỏi, cùng tin tức từ Zorofilm.

Khoảng một email mỗi tháng với hướng dẫn in lụa mới và tin tức từ Zorofilm. Trước tiên, chúng tôi gửi email cho bạn một liên kết để xác nhận, và bạn có thể hủy đăng ký bất cứ lúc nào. Chính sách quyền riêng tư

Thử trên hình in của chính bạn

Zorofilm làm đúng những gì các hướng dẫn này giải thích: tách màu, lót trắng, trap, tram và phim, in trên máy Epson của bạn hoặc xuất file. Gói Free làm được 10 phim mỗi tháng, đã gồm in trực tiếp.