What should you compare?
- The coating. Most screen films are sold as waterproof or water-resistant, with a microporous or nanoporous coating that takes a lot of black. Not all: Handprinted's inkjet screen film says it must not get wet, and Prizma's film is water resistant only with pigment inks.
- Thickness. Most of the films in our table that state one are 5 mil (127 µm) or 130 µm; Epson's Screen Positive Film is 5.3 mil and AWP's 4 mil.
- Ink. Most say they take both dye and pigment ink; Ulano says the opacity comes from the ink deposit set in the RIP.
- The coated side. Films are coated on one side; Lawson, for example, says to print on the matte side.
- Size. Check your printer's sheet or roll width first; the film table lists each product's sheets and rolls.
Can you compare the density on the box?
Not really. Some makers give a UV density, some a visual (optical) one, and some do not say. Prizma's page gives the same film an optical density of 2.6 and a UV density above 4.0. Wasatch, a RIP maker, read the same roll at under 2.0 and over 4.5 depending on the printer's mode, and notes that higher density on inkjet film usually means more dot gain. The number that counts is the one you measure on your printer, ink and film.
What density do trade sources publish?
- SPTF's capillary film troubleshooting sheet (hosted by KIWO): solid density 3.5 or higher, clear areas 0.3 or less, without saying whether UV or visual.
- Screen Printing magazine (1999): film Dmax 3.0 or higher, Dmin ideally below 0.1; for inkjet film the UV-stopping ability matters, not visual opacity.
- Wasatch: a UV Dmax of 2.5 is “high enough for nearly all screen printing”, and 3.0 or more for comfort.
Which films are listed?
The film table lists 18 inkjet films for screen positives, from Lawson, ScreenPrinting.com (Baselayr and Rite), Screen Print Direct, Fixxons, McLogan, Kolormatrix, AWP, Chromaline, Ultrafine, Epson, Ulano, Prizma, PosiPrint, MICRONOM PRO, Printbox, Handprinted and InkStar, each with thickness, coating, ink compatibility, density claim, sizes, a dated price snapshot and its source. Brands we looked for and could not read are listed as not found, not guessed.
How do you test a new film?
Print Zorofilm's density ladder on it, choose the density from that, and keep the film and the setting together: a new film brand means a new test. See film density test.
出典
- Handprinted, Inkjet Screen Film · 取得 2026-11-01
- Prizma Graphics, Positive Screen Inkjet Film · 取得 2026-11-01
- Lawson, Water Resistant Inkjet Film for Film Positives · 取得 2026-11-01
- Ulano, Pigment Inkjet Film · 取得 2026-11-01
- Epson, Screen Positive Film · 取得 2026-11-01
- SPTF, “Capillary Film Troubleshooting” (hosted by KIWO, PDF) · 取得 2026-11-01
- F. Basch, “Densitometry: Your Guide to Print Quality”, Screen Printing, 1999 · 取得 2026-11-01
- Wasatch SoftRIP help, colour separation linearity · 取得 2026-11-01
ほかに困っていることはありますか?質問してください。Zorofilmチームがすべての質問に回答します。
質問する新しいスクリーン印刷ガイドをメールでお届け
月1通ほどのメールで、新しいガイド、よく寄せられるトラブルの解決策、Zorofilmのお知らせをお届けします。
