배우기
원고에서 필름 포지티브까지, 가이드 하나씩.
가이드 20개를 필요한 순서대로 모았어요. 코스 5개, 무료, 계정 없이 볼 수 있어요.
01 · 가이드: 3 · 10 분
필름 작업 흐름부터 시작하기
필름 포지티브가 무엇인지, Photoshop 없이 만드는 방법, 어떤 원고를 받아야 하는지, 작업에 맞는 분판 방식.
- How to print film positives without PhotoshopTurn artwork into screen-printing film positives without Photoshop: separate the inks, add underbase and trap, halftone, and print each film on an Epson.4 분
- Prepare artwork for screen printing: resolution, vectors, fontsWhat artwork makes clean films: vector PDF or AI with spot colours, raster at about 300 ppi at print size, outlined fonts, no background box, details the mesh holds.3 분
- Spot, index and simulated process separations, explainedSpot, index and simulated process: how each separation works, which art suits it, the mesh and LPI that sources publish, and which ones Zorofilm makes today.3 분
02 · 가이드: 5 · 15 분
첫 필름: 망점과 레이아웃
메시에 맞는 LPI, 망점 모양, 모아레 없는 스크린 각도, 레지스트레이션 마크, 프린터보다 큰 필름.
- Which LPI for which mesh count? Rules and a tableMesh count to LPI: the 4–5× rule and where the sources disagree, a sourced table from 150 to 355 mesh, smallest-dot rules, and what Zorofilm suggests and warns.3 분
- Halftone dot shapes: round, elliptical, Euclidean and moreHow round, elliptical, Euclidean, square and line dots behave on a screen, where each joins and jumps in the midtones, and which shapes Zorofilm has today.3 분
- How to avoid moiré: screen angles for screen printingMoiré comes from halftone rows beating against the mesh or each other. The angles sources recommend (22.5°, 25°, 67.5°), why one angle for spot inks, and how to test.3 분
- Registration marks and lining up multi-colour filmsHow registration marks line up the screens of a multi-colour print, what a good film set carries (marks, print order, ruler), and how to check films before burning.3 분
- Tile a large film on a small printerPrint a film bigger than your printer as overlapping tiles that share one halftone, tape them on the seam ticks, or make it fit with rotation, margins or a bigger sheet.3 분
03 · 가이드: 5 · 15 분
분판
화이트 언더베이스와 초크, 트래핑, 이미 분판되어 오는 파일(PSD 스폿 채널, PDF 스폿 컬러), 인덱스 분판.
- White underbase and choke for dark garmentsWhy dark shirts need a white underbase, how far to choke it (published ranges in pixels and mm), when to add a highlight white, and how Zorofilm builds both.3 분
- Trapping for screen printing: how much and which wayTrapping hides small misregistration by spreading the lighter ink under the darker one. The published amounts, the measure-and-double rule, and Zorofilm's presets.3 분
- Make films from a PSD with spot channelsOpen a Photoshop PSD already separated into spot channels and get one film per channel, with your names, without re-separating. What is read and what is not.3 분
- Make films from a PDF or AI file with spot coloursOpen a vector PDF or Illustrator file with spot colours and get one film per spot ink, with tints as halftones. What to ask the designer for, and today's limits.3 분
- Index separations for screen printing: how they workIndex separations dither art into square pixels of a fixed ink set. The published resolutions, palette sizes and mesh ranges, and why the pixel must fit the printer.3 분
04 · 가이드: 4 · 12 분
프린터와 잉크
필름 포지티브 프린터 고르기, 판매처가 공개한 블랙 잉크 전용 개조 방법, 필름 고르기, 첫 실제 작업 전 농도 테스트.
- Choose a film positive printer for screen printingWhat matters in a film positive printer: width, a published all-black ink route, a current model, film feeding and software. Epson models compared, with Zorofilm's status.3 분
- Convert an EcoTank to all-black ink for film positivesThe all-black routes kit vendors publish for Epson EcoTanks (every tank, one tank, two tanks), what Epson says about it, and how Zorofilm prints on each route.3 분
- Choose inkjet film for screen print positivesWhat to compare in inkjet film for screen printing: waterproof coating, thickness, ink compatibility, sizes, and density claims that cannot be compared as published.3 분
- Film density test: find the right ink densityPrint a density ladder and a step wedge on your printer, ink and film, read them with a densitometer or the makers' own tools, and set Zorofilm's ink density.3 분
05 · 가이드: 3 · 9 분
작업장 운영: 도구 바꾸기
AccuRIP Emerald, Separation Studio NXT, Photoshop 플러그인에서 필름 작업을 옮기는 방법, 그대로 가져갈 수 있는 것, 도구별 비용.
- Moving from AccuRIP Emerald to ZorofilmWhat changes when you move film output from AccuRIP Emerald to Zorofilm: separations built in, settings to copy by hand, ink kits, printers and file formats.3 분
- Moving from Separation Studio NXT to ZorofilmSeparation Studio NXT separates and needs a RIP for films; Zorofilm separates spot work and makes the films. What moves over, and what stays in NXT for now.3 분
- Moving from Photoshop actions and plug-ins to ZorofilmFrom T-Seps, UltraSeps or hand-made channels in Photoshop to Zorofilm: what replaces the Bitmap halftone step, what stays in Photoshop, and what the tools cost.3 분
새 실크스크린 인쇄 가이드를 이메일로 받아 보세요
한 달에 이메일 한 통 정도: 새 가이드, 많이들 묻는 문제의 해결법, Zorofilm 소식을 보내 드려요.
가이드가 설명하는 일을 앱이 해 줘요
Zorofilm은 원고를 분판하고, 언더베이스와 트랩을 넣고, 망점으로 만든 뒤 Epson에서 잉크마다 필름을 한 장씩 출력해요. PDF와 PNG로 내보낼 수도 있어요. 월 10장까지 무료.
Zorofilm 무료로 써 보기