- Install Zorofilm next to Emerald
- Write down your Emerald dot, LPI and angle
- Open a known job in Zorofilm and set the same halftone
- Print the density ladder and set the ink density
- Compare the films on a light table, then move new jobs over
What is different?
- Separations. Emerald installs a printer driver and prints separations from Adobe programs, CorelDRAW or Separation Studio NXT; it makes none of its own. Zorofilm separates the artwork itself, or uses the spot channels or spot colours already in the file.
- Price. Emerald is $199 a year for one computer, and the Pro Bundle with Separation Studio NXT is $399 a year (Freehand's pages, checked 2026-10-31). Zorofilm has a Free plan with 10 films a month; the paid plans are on pricing.
- Platforms. Both run on macOS and Windows.
- Printers. Freehand says Emerald supports over 50 models. Zorofilm drives fewer, each with its status on its printer page, and exports PDF films for any other printer.
What carries over?
- Your separated files: a PSD with spot channels opens as one film per channel (PSD guide), and a PDF or AI file with spot colours opens onto those inks (PDF guide).
- Your original artwork: open it directly and let Zorofilm separate it.
- Your converted printer and its ink: Emerald's All Black Ink mode (every slot) matches Output → Black ink in → Every channel, and Select Tank (one slot, such as photo black on the ET-8550) matches One channel only.
- Your film.
What has to be set again by hand?
- Halftone settings. Emerald keeps dot shape, LPI and angle in the RIP, and we found no documented way to export them. Write them down and set them in Zorofilm's Halftone tab, which starts at 230 mesh, 55 LPI, 22.5° and a round dot.
- Density. Emerald's droplet and density settings do not translate. Print Zorofilm's density ladder and step wedge once per printer, ink and film.
- Ink names. Keep your shop's inks in Inks → My inks, and every job offers the closest of yours.
What does not carry over?
- DCS2 EPS files, which Emerald and NXT save: Zorofilm does not read EPS. Save a PSD or PDF from the separation program instead.
- Emerald's direct-to-screen (DTS) output: Zorofilm makes films only.
- Printers Zorofilm cannot drive yet, such as the SureColor T3170x: export the films as PDF and print them with your current driver, or keep Emerald for that printer.
How should you switch?
- Install Zorofilm next to Emerald; nothing has to be removed.
- Run one job you know well through both, at the same LPI, angle and dot, and compare the films on a light table.
- Print the density ladder in Zorofilm and set the ink density.
- Move new jobs over first, and keep Emerald until its term ends for reprints of old separated files.
Side by side: Zorofilm vs AccuRIP Emerald and AccuRIP alternatives.
Šaltiniai
- Freehand, AccuRIP Emerald · žiūrėta 2026-10-31
- Freehand, AccuRIP compatibility tables · žiūrėta 2026-11-01
Įstrigai kitur? Klausk — Zorofilm komanda atsako į kiekvieną klausimą.
Užduoti klausimąNauji šilkografijos gidai tavo el. pašte
Maždaug vienas el. laiškas per mėnesį: nauji gidai, sprendimai problemoms, apie kurias klausia žmonės, ir Zorofilm naujienos.
