Skip to content

Moving from AccuRIP Emerald to Zorofilm

AccuRIP Emerald is a film RIP: it prints separations you made in another program. Zorofilm makes the separations and the films in one app, so moving is mostly opening your artwork or separated files directly and copying your halftone and density settings across by hand.

3 分で読めます · 更新 2026-11-07 · Zorofilm
要点
  1. Install Zorofilm next to Emerald
  2. Write down your Emerald dot, LPI and angle
  3. Open a known job in Zorofilm and set the same halftone
  4. Print the density ladder and set the ink density
  5. Compare the films on a light table, then move new jobs over

What is different?

  • Separations. Emerald installs a printer driver and prints separations from Adobe programs, CorelDRAW or Separation Studio NXT; it makes none of its own. Zorofilm separates the artwork itself, or uses the spot channels or spot colours already in the file.
  • Price. Emerald is $199 a year for one computer, and the Pro Bundle with Separation Studio NXT is $399 a year (Freehand's pages, checked 2026-10-31). Zorofilm has a Free plan with 10 films a month; the paid plans are on pricing.
  • Platforms. Both run on macOS and Windows.
  • Printers. Freehand says Emerald supports over 50 models. Zorofilm drives fewer, each with its status on its printer page, and exports PDF films for any other printer.

What carries over?

  • Your separated files: a PSD with spot channels opens as one film per channel (PSD guide), and a PDF or AI file with spot colours opens onto those inks (PDF guide).
  • Your original artwork: open it directly and let Zorofilm separate it.
  • Your converted printer and its ink: Emerald's All Black Ink mode (every slot) matches Output → Black ink in → Every channel, and Select Tank (one slot, such as photo black on the ET-8550) matches One channel only.
  • Your film.

What has to be set again by hand?

  • Halftone settings. Emerald keeps dot shape, LPI and angle in the RIP, and we found no documented way to export them. Write them down and set them in Zorofilm's Halftone tab, which starts at 230 mesh, 55 LPI, 22.5° and a round dot.
  • Density. Emerald's droplet and density settings do not translate. Print Zorofilm's density ladder and step wedge once per printer, ink and film.
  • Ink names. Keep your shop's inks in Inks → My inks, and every job offers the closest of yours.

What does not carry over?

  • DCS2 EPS files, which Emerald and NXT save: Zorofilm does not read EPS. Save a PSD or PDF from the separation program instead.
  • Emerald's direct-to-screen (DTS) output: Zorofilm makes films only.
  • Printers Zorofilm cannot drive yet, such as the SureColor T3170x: export the films as PDF and print them with your current driver, or keep Emerald for that printer.

How should you switch?

  1. Install Zorofilm next to Emerald; nothing has to be removed.
  2. Run one job you know well through both, at the same LPI, angle and dot, and compare the films on a light table.
  3. Print the density ladder in Zorofilm and set the ink density.
  4. Move new jobs over first, and keep Emerald until its term ends for reprints of old separated files.

Side by side: Zorofilm vs AccuRIP Emerald and AccuRIP alternatives.

出典

  1. Freehand, AccuRIP Emerald · 取得 2026-10-31
  2. Freehand, AccuRIP compatibility tables · 取得 2026-11-01

ほかに困っていることはありますか?質問してください。Zorofilmチームがすべての質問に回答します。

質問する

新しいスクリーン印刷ガイドをメールでお届け

月1通ほどのメールで、新しいガイド、よく寄せられるトラブルの解決策、Zorofilmのお知らせをお届けします。

新しいスクリーン印刷ガイドとZorofilmのお知らせを月1通ほどお届けします。まず確認用のリンクをメールでお送りします。配信はいつでも停止できます。 プライバシーポリシー

ご自身のアートワークで試してみましょう

Zorofilmは、これらのガイドで説明していることを実行します:色分解、白下地、トラッピング、網点、フィルムを、Epsonで出力または書き出し。Freeプランは毎月10枚、直接出力も含みます。