Skip to content

Which LPI for which mesh count? Rules and a table

Most published rules put the mesh count at 4 to 5 times the LPI: 230 mesh suits about 46–57 LPI (ScreenPrinting.com). Zorofilm suggests mesh ÷ 4.5, warns below ÷ 4 and flags below ÷ 3.5; your own test print has the last word.

3 分鐘閱讀 · 更新於 2026-11-07 · Zorofilm

What do the sources say?

  • Mesh = 4–5 × LPI: ScreenPrinting.com help centre, Fresener (T-Biz), Blue Cotton.
  • LPI = mesh ÷ 5, or ÷ 4 for a well dialled-in darkroom: ScreenPrinting.com blog.
  • Mesh = LPI × 4 to 4.5, with at least four mesh openings per dot, and only at angles that work: Murakami.
  • × 3.5 and × 4 as minimums, from an author who calls relying on rules of thumb “pointless”: Screen Printing magazine, 2003.
  • At least 3.5 : 1, 4.5 : 1 as “international practice”, 5 : 1 for colour halftones: ZXC Print, a supplier, kept as a disagreeing data point.

They disagree partly because mesh is less regular than its number: nominal counts are rounded from metric, the weft varies by 5–7 %, and a 305 mesh at tension may be about 290 threads per inch (Screen Printing magazine, 2003). The angle matters too; see avoiding moiré.

Mesh to LPI, as published

  • 150 and 180 thin-thread (LX) mesh: 45–55 LPI (Murakami).
  • 160 mesh: 32–40 LPI, ÷ 5 to ÷ 4 (ScreenPrinting.com blog); 35 LPI, “about the lowest most shops use” (Blue Cotton).
  • 180–225 mesh: 45 LPI, with 230 suggested for more margin (ScreenPrinting.com help centre).
  • 200 mesh: 50 LPI (T-Biz).
  • 205–255 mesh: 45 LPI as the process minimum (Blue Cotton).
  • 230 mesh: 46–57 LPI (ScreenPrinting.com help centre).
  • 230–265 mesh: 65 LPI, at 3.5× and 4× (Screen Printing magazine, 2003).
  • 240 mesh: 55 LPI, Murakami's worked example.
  • 305 mesh: 55 LPI (Blue Cotton; 5.5×, outside its own rule).
  • 355 mesh: 85 LPI, KIWO's ExpoCheck example.

The full table with every source and date is on mesh and LPI, and the mesh ↔ LPI calculator does the arithmetic for your mesh.

How fine should textile halftones be?

Screen Printing magazine (Coudray, 2002) calls 40–65 LPI generally appropriate for textiles, at least 10 LPI lower on sweatshirts, and gives a “rule of 240”: 240 ÷ LPI is roughly the viewing distance in feet. Fresener suggests 35–45 LPI for cartoon work, 55 LPI on a manual press and 65 on an automatic.

What is the smallest dot a mesh holds?

  • Two mesh openings plus two thread diameters, or twice the total screen thickness (Dennings, SGIA Journal 1998, hosted by KIWO).
  • Two thread diameters plus one mesh opening (Coates).
  • At least four mesh openings per dot (Murakami).
  • Holding an 8 % dot consistently is high quality (Blue Cotton).

In Zorofilm, Halftone → Smallest dot is From mesh by default: an estimate from two threads plus one opening, using typical thread sizes rather than your mesh's datasheet, and the app marks it as an estimate. Tones below it are dropped and the check strip says so; anything above Solid above (95 % by default) prints solid.

What does Zorofilm check?

  • Under Halftone, the suggestion for your mesh: about mesh ÷ 4.5 LPI, for example 51 LPI on 230 mesh.
  • Amber when mesh ÷ LPI is under 4: small dots may not hold.
  • Red when it is under 3.5: too fine for that mesh.
  • Red when the angle is within 5° of the mesh threads or knuckles (0°, 45°, 90°).

來源

  1. ScreenPrinting.com help centre, “What mesh count should I use for halftones?” · 取得於 2026-11-01
  2. ScreenPrinting.com blog, “A Crash Course in Halftones” · 取得於 2026-11-01
  3. S. Fresener, “All About DPI, LPI, PPI & More”, T-Biz Network, 2015 · 取得於 2026-11-01
  4. Blue Cotton blog, halftone screen printing · 取得於 2026-11-01
  5. Murakami Screen, “How to prevent moiré” · 取得於 2026-11-01
  6. Murakami Screen, Smart Mesh S + LX · 取得於 2026-11-01
  7. Screen Printing magazine, “All Things Are Not as They Appear”, 2003 · 取得於 2026-11-01
  8. ZXC Print, elimination of moiré patterns (supplier article) · 取得於 2026-11-01
  9. Screen Printing magazine (M. Coudray), October 2002 · 取得於 2026-11-01
  10. D. Dennings, “Understanding Mesh Geometry”, SGIA Journal 1998 (hosted by KIWO, PDF) · 取得於 2026-11-01
  11. Coates Screen Inks (H. de Groote), “Process printing with UV inks” (PDF) · 取得於 2026-11-01
  12. KIWO, ExpoCheck · 取得於 2026-11-01

還有其他地方卡關嗎?歡迎發問 — Zorofilm 團隊會回答每一個問題。

發問

新的網版印刷教學,直接寄到您的信箱

大約每月一封電子郵件:新的教學、大家常問問題的解決方法,以及 Zorofilm 的最新消息。

大約每月一封電子郵件,內容包括新的網版印刷教學與 Zorofilm 最新消息。我們會先寄送確認連結到您的信箱,您也可以隨時取消訂閱。 隱私權政策

用您自己的圖稿試試看

Zorofilm 做的正是這些教學所說明的:分色、白底、補漏白、網點與底片,用您的 Epson 列印或匯出。Free 方案每月 10 張底片,含直接列印。