免費 · 不需帳號
這個網目該用多少 LPI?
輸入網目數或 LPI。您會看到每條公開規則的結果與其來源,以及您的網目預期能承載的最小網點。
所有規則合計:46–66 LPI。
Zorofilm 應用程式從網目 ÷ 4.5 開始:51 LPI。 您的組合:網目 ÷ LPI = 4.2
每條公開規則怎麼說
| 規則 | 230 絲/英吋的 LPI | 55 LPI 的網目 | 您的組合 | 來源 |
|---|---|---|---|---|
| mesh_tpi = lpi x 4 to 4.5Works only with film output at specific angles ('Not all angles work'); requires four or more mesh openings per halftone dot. S-thread mesh can run 45/55 lpi below the 4x result. | 51–58 LPI | 220–248 絲/英吋 | 符合規則 | Murakami Screen取得於 2026-11-01 |
| mesh_tpi = lpi x 3.5 or x 4 (the two most common, treated as minimums)Author calls relying on rules of thumb 'pointless'; nominal counts rounded from metric, weft varies 5-7%, a 305 mesh may be ~290 tpi at tension; a 45° angle lowers effective frequency. | 58–66 LPI | 193–220 絲/英吋 | 超出規則 | Screen Printing magazine, 'All Things Are Not as They Appear' (April 2003)取得於 2026-11-01 |
| lpi = mesh / 5 (or mesh / 4 for a 'dialed-in darkroom')Recommends 22.5° angles; says printers typically choose 30% dot gain. | 46–58 LPI | 220–275 絲/英吋 | 符合規則 | ScreenPrinting.com (Ryonet) blog, 'A Crash Course in Halftones'取得於 2026-11-01 |
| mesh = 4-5 x lpi | 46–58 LPI | 220–275 絲/英吋 | 符合規則 | ScreenPrinting.com help centre (Ryonet)取得於 2026-11-01 |
| mesh ≈ 4-5 x lpiIts own 305 mesh / 55 lpi pairing (5.5x) falls outside its stated range. | 46–58 LPI | 220–275 絲/英吋 | 符合規則 | Blue Cotton blog取得於 2026-11-01 |
| 'a mesh that is 4 to 5 times the LPI'Avoid tints above 70%. | 46–58 LPI | 220–275 絲/英吋 | 符合規則 | T-Biz Network (Scott Fresener), 'All About DPI, LPI, PPI & More' (2015-12-10)取得於 2026-11-01 |
| >= 3.5:1 required; >= 4.5:1 'international practice'; >= 5:1 for colour halftonesKept as a disagreeing data point. | 最高 66 LPI | 193 絲/英吋或更細 | 符合規則 | ZXC Print (Chinese supplier, low authority)取得於 2026-11-01 |
230 絲/英吋上 55 LPI 的最小網點
| 規則 | 最小網點 | 來源 |
|---|---|---|
| Smallest dot/line >= 2 mesh openings + 2 thread diameters, or >= 2 x total screen thickness (mesh + stencil); dots smaller than the opening fall through | 直徑 221 µm ≈ 18% 網點依規則計算 | KIWO-hosted article: Dave Dennings, 'Understanding Mesh Geometry', SGIA Journal, April 1998取得於 2026-11-01 |
| Printable dot limit: 'Two thread counts and one mesh-opening'Disagrees with D1 (2 openings + 2 threads). Both kept. | 請加上絲徑 | Coates Screen Inks (Harald de Groote), 'Process Printing with UV Inks'取得於 2026-11-01 |
| Smallest dot spans two threads + one mesh opening; medium thread diameter preferredSearch snippet only; page behind a bot checkpoint (not bypassed). | 請加上絲徑 | Sefar, 'Half-tone count' FAQ取得於 2026-11-01 · 僅有搜尋摘要;無法讀取該頁面 |
| >= 4 mesh open areas per halftone dot | 直徑 249 µm ≈ 23% 網點我們對規則的解讀 | Murakami Screen取得於 2026-11-01 |
| Holding an 8% dot consistently = high quality | 參考基準,不是尺寸 | Blue Cotton blog取得於 2026-11-01 |
230 絲/英吋附近的公開組合
- 網目 240 → 55 LPIWorked example of R1; PDF https://www.murakamiscreen.com/documents/HalftoneAnglestopreventmoire.pdf. Also: white base on 250-300 mesh 'simply won't print well'.Murakami Screen取得於 2026-11-01
- 網目 230–265 → 65 LPI65 lpi: 3.5x -> ~230 tpi; 4x -> 255-265 tpi (260)Screen Printing magazine (April 2003)取得於 2026-11-01
- 網目 180–225 → 45 LPI180-225 for 45 lpi; suggests 230 'for more margin'ScreenPrinting.com help centre取得於 2026-11-01
- 網目 230 → 46–57 LPIScreenPrinting.com help centre取得於 2026-11-01
- 網目 205–255 → 45 LPI205 or 255 for 45 lpi ('process minimum')Blue Cotton blog取得於 2026-11-01
沒有網目時: 40-65 lpi 'generally appropriate' for textiles; sweatshirts at least 10 lpi lower; 'Rule of 240': 240 / lpi ≈ viewing distance in feet — Screen Printing magazine (Mark Coudray), Oct 2002, 取得於 2026-11-01
經驗法則彼此不一致,網紗實際的目數、絲徑與張力也各有差異。這些數字只是起點,並不保證網點一定能保留:最後以您自己的測試底片為準。
使用方式
- 選擇從網目或從 LPI 開始。
- 輸入數字;可切換每英吋絲數與每公分絲數。
- 閱讀每條規則的結果並開啟其來源。
- 有些最小網點規則需要絲徑,請加上您網紗的絲徑。
常見問題
為什麼規則之間不一致?
每個來源都有自己的經驗法則,有些甚至直說經驗法則只是起點。我們列出每條規則與其連結,而不是只挑一條。
每英吋還是每公分絲數?
每公分 1 絲等於每英吋 2.54 絲。歐洲網紗常以每公分絲數標示:120/cm 約等於每英吋 305 絲。
最小網點怎麼算出來?
依規則的幾何關係:網紗節距(一個網孔加一條絲)、網點單元(1 英吋 ÷ LPI)與一個圓形網點。這是我們根據公開規則所做的計算,並不保證網點一定能保留;最後以您自己的測試底片為準。
Zorofilm 應用程式使用這些規則嗎?
應用程式建議以網目數 ÷ 4.5 作為起始 LPI,並在網目數 ÷ LPI 低於 4 時提出警告,低於 3.5 時再次警告。