Skip to content

Prepare artwork for screen printing: resolution, vectors, fonts

Ask for vector artwork (PDF, AI or SVG) with each ink as a spot colour, or a raster file at about 300 ppi at the final print size with a transparent background. Outline the fonts, leave out background boxes, and keep lines and dots bold enough for your mesh.

3 mnt baca · Diperbarui 2026-11-07 · Zorofilm
Singkatnya
  1. Ask for a vector PDF or AI with spot colours, or a PSD with spot channels
  2. Otherwise a transparent PNG at about 300 ppi at print size
  3. Outline or embed the fonts
  4. Remove background boxes
  5. Check thin lines against the mesh you will use

Which file should you ask the customer for?

  • Best: a vector PDF or Illustrator AI file, with the spot colours named the way the inks should be. It stays sharp at any size and its spot colours become the inks. AI files need “Create PDF Compatible File” on; see PDF and AI spot colours.
  • Good: a PSD already separated into spot channels, one per ink. See PSD with spot channels.
  • Fine: a PNG with a transparent background at about 300 ppi at print size. One print shop's published requirements ask for 300 dpi at print size, no more than about 10 % scaling, and outlined fonts (FSG Prints).
  • Last resort: a JPEG. Compression leaves speckles around edges; Zorofilm cleans them up, but a PNG, PDF or AI of the same design separates better.
  • Not read: EPS, legacy Illustrator files and AI files saved without PDF content. Zorofilm says what to export instead, usually a PDF.

How much resolution is enough?

Work it out at the print size, not from the pixel count. A 3,000 pixel wide file printed 254 mm (10 in) wide is 300 ppi; the same file across a 381 mm (15 in) back is 200 ppi. At 72 ppi one pixel is 0.35 mm wide, so edges step and small text blurs. Zorofilm shows the effective ppi at the width you set and warns when it is low. A file that does not state a print size is assumed to be 300 ppi until you set the width.

What about fonts?

Convert the type to outlines, or embed the fonts, before the PDF is saved. A font that is neither gets replaced by another one when the file is opened on a different computer, and the film shows the substitute.

What makes a design hard to separate?

  • A solid background box. On a dark shirt it would print as a rectangle. Turn on Remove the background in the Job tab, or set the garment to that colour.
  • A photo of the design, on paper, a screen or a shirt. Phone photos rarely separate cleanly: ask for the original file.
  • Photos and painted art. Spot inks posterise them; simulated process, the method for photos, is planned for Zorofilm and is not in this version. Spot, index and simulated process explains the difference.
  • More colours than the press has heads. Past six inks Zorofilm asks you to check that your press has enough heads, and it points out inks so close that merging them saves a screen.
  • Lines and dots thinner than the screen holds. Published rules put the smallest printable dot at two thread diameters plus one mesh opening (Coates) or two openings plus two threads (Dennings, hosted by KIWO): the coarser the mesh, the bolder the detail has to be. Zorofilm also warns when the underbase choke would take the base away from thin lines.

How big should the print be?

That is your call and the customer's; set the width in the Job tab. Zorofilm offers starting widths for common places (left chest, full front, full back, youth front, sleeve, oversize), and can add the same design at another place or size as a second job with the same inks, its films labelled with the place.

Sumber

  1. FSG Prints, art requirements · diakses 2026-11-04
  2. Coates Screen Inks (H. de Groote), “Process printing with UV inks” (PDF) · diakses 2026-11-01
  3. D. Dennings, “Understanding Mesh Geometry”, SGIA Journal 1998 (hosted by KIWO, PDF) · diakses 2026-11-01

Buntu di hal lain? Tanyakan — tim Zorofilm menjawab setiap pertanyaan.

Ajukan pertanyaan

Panduan sablon baru, langsung ke inbox Anda

Sekitar satu email per bulan: panduan baru, solusi untuk masalah yang sering ditanyakan, dan kabar terbaru Zorofilm.

Sekitar satu email per bulan berisi panduan sablon baru dan kabar Zorofilm. Kami akan mengirimkan tautan konfirmasi ke email Anda terlebih dahulu, dan Anda bisa berhenti berlangganan kapan saja. Kebijakan privasi

Coba dengan artwork Anda sendiri

Zorofilm melakukan apa yang dijelaskan panduan ini: separasi, underbase, trap, halftone, dan film, dicetak di Epson Anda atau diekspor. Paket Free membuat 10 film per bulan, sudah termasuk cetak langsung.